Multi-tube Cartridge Filter
Housings With Swing Bolt
This multi-tube cartridge filter housing is made of 304 or 316Lstainless steel. Standard housings accept 10, 20, 30 or 40-inch, DOE cartridges. Inlet and outlet are ANSI flange connection. A swing bolt closure allows quick disassembly for cleaning and service. This cartridge filter housing is ideal for a wide variety of high flow applications that require an economical, high quality housing.
● Uses stainless steel construction for maximum corrosion resistance to deliver years of dependable service
● A swing bolt closure allows quick disassembly for cleaning and service
● An air vent plug on the cover allows venting before start-up
● Two NPT drain plugs allow for liquid removal
● Knife edge seal at both cartridge ends to eliminate by-pass
● Mounting legs standard
|
Standard Design Parameters Design Pressure: 100psi (7bar)
Options ● Other outlet styles are available
|
|
|
Specification
| Side In and Side Out | Model | Outline Dimensions/inches(cm) | Pipe Size |
Cartridge | Flow Rate/gpm(lpm) | ||||
| A | B | C | D | Qty | Length | ||||
 |
3-10 | 6.5(16.5) | 3.5(9) | 17.7(45) | 6.3(16) | 1" | 3 | 10" | 4.4(16.7) |
| 5-20 | 17.7(45) | 8.7(22) | 39.4(100) | 7.9(20) | 11/2" | 5 | 20" | 18(68) | |
| 5-30 | 19.7(50) | 9.8(25) | 47.2(120) | 7.9(20) | 2" | 5 | 30" | 26(98) | |
| 7-20 | 17.7(45) | 8.7(22) | 39.4(100) | 9.1(23) | 11/2" | 7 | 20" | 24(90) | |
| 7-30 | 19.7(50) | 9.8(25) | 47.2(120) | 9.1(23) | 2" | 7 | 30" | 33(125) | |
| 12-20 | 23.6(60) | 9.8(25) | 41.3(105) | 11.8(30) | 2" | 12 | 20" | 42(159) | |
| 12-30 | 23.6(60) | 11.8(30) | 51.2(130) | 11.8(30) | 2" | 12 | 30" | 63(238) | |
| 12-40 | 23.6(60) | 11.8(30) | 63.0(160) | 11.8(30) | 21/2" | 12 | 40" | 79(299) | |
| 15-30 | 23.6(60) | 11.8(30) | 55.1(140) | 13.8(35) | 21/2" | 15 | 30" | 79(299) | |
| 15-40 | 23.6(60) | 11.8(30) | 63.0(160) | 13.8(35) | 3" | 15 | 40" | 99(375) | |
| 20-30 | 31.5(80) | 13.8(35) | 57.1(145) | 15.7(40) | 3" | 20 | 30" | 106(401) | |
| 20-40 | 31.5(80) | 13.8(35) | 65.0(165) | 15.7(40) | 3" | 20 | 40" | 132(500) | |
| Side In and Bottom Out | |||||||||
 |
5-20 | 23.6(60) | 7.9(20) | 43.3(110) | 7.9(20) | 11/2" | 5 | 20" | 18(68) |
| 5-30 | 23.6(60) | 9.8(25) | 53.1(135) | 7.9(20) | 2" | 5 | 30" | 26(98) | |
| 7-20 | 25.6(65) | 7.9(20) | 43.3(110) | 9.1(23) | 11/2" | 7 | 20" | 24(90) | |
| 7-30 | 23.6(60) | 9.8(25) | 53.1(135) | 9.1(23) | 2" | 7 | 30" | 33(125) | |
| 12-20 | 23.6(60) | 9.8(25) | 47.2(120) | 11.8(30) | 2" | 12 | 20" | 42(159) | |
| 12-30 | 23.6(60) | 9.8(25) | 55.1(140) | 11.8(30) | 2" | 12 | 30" | 63(238) | |
| 12-40 | 31.5(80) | 11.8(30) | 65.0(165) | 11.8(30) | 21/2" | 12 | 40" | 79(299) | |
| 15-30 | 31.5(80) | 11.8(30) | 59.1(150) | 13.8(35) | 21/2" | 15 | 30" | 79(299) | |
| 15-40 | 31.5(80) | 11.8(30) | 70(170) | 13.8(35) | 3" | 15 | 40" | 99(375) | |
| 20-30 | 31.5(80) | 11.8(30) | 61(155) | 15.7(40) | 3" | 20 | 30" | 106(401) | |
| 20-40 | 31.5(80) | 11.8(30) | 68.9(175) | 15.7(40) | 3" | 20 | 40" | 132(500) | |
Note: 1. Available in a variety of standard designs or can be custom fabricated to meet your requirements.
2. Flow rates are for guidelines only, actual flow rates will vary depending on fluid, viscosity, cartridge type,
micron ratings and other factors.
Ordering Guide
| CF | -5 | -10 | -SB | -GB | -316L | E | |
| Model | Column Qty |
Cartridge Length | Cartridge Configuration |
Closure | Finish | Material | Gasket |
| CF | 5 7 12 15 20 |
10=10" 20=20" 30=30" 40=40" |
Blank=DOE |
SB=swing bolt SBH=swing bolt with hinge |
GB=glass bead P=passivate EP=electro -polished |
Blank=304SS 316L=316LSS |
Blank=Buna E=EPR S=Silicon V=Viton T=Teflon |
Filter and Its Internals Brochure
Cartridge & Bag Filter Brochure
Stainless Steel Vessel Internals
Filter Nozzles & Distributors
Filter Elements & Filter Bags