High Flow Filter Elements
Our large diameter, high flow filter elements are coreless, single open-ended, of pleated construction. Flow direction moves in an inside to outside pattern. Crescent-shaped pleated filter media, combined with its large diameter, reduces the number of filter elements and size of housing required.
Features
* Fewer filter element change-outs
* Lower maintenance costs
* Lower disposal costs
* Smaller housing diameter
* Inside to outside flow pattern which makes contaminants held inside the single open end filter elements.
* Fine fibers provide maximum dirt-holding, high flow rates and particle removal efficiency
Applications
* Condensate polishing
* Coolant water and process water
* RO prefiltration
* Salt water injection/produced water
* Prefiltration of seawater desalination system
Specification
Materials
Filter Media: Pleated polypropylene depth structure
Support/Drainage Layer: Polypropylene
End Caps: Polypropylene
O-ring: Ethylene propylene
Outside Diamete
6" (152 mm)
Length
20", 40", 60"
Retention Ratings (Nominal)
5µm, 10µm, 20µm, 40µm, 75µm, 100µm
Single open end
Operating Conditions
Maximum Operating Temperature: 180°F(82°C)
Maximum Differential Pressure1: 35 psid at 68°F(20°C)
Recommended Flow Rate (For 60" Length): 110-220gpm (25-50m3/h) *
*Actual flow rates will vary depending on fluid, viscosity, micron ratings and other factors.
Filter and Its Internals Brochure
Cartridge & Bag Filter Brochure
Stainless Steel Vessel Internals
Filter Nozzles & Distributors
Filter Elements & Filter Bags